All Articles

How to Remove Blinds from Your Window Without Damaging It

How To Remove Blinds From Your Window Without Damaging It

DIY Blinds Removal Without Any Damage

We all know that blinds are an effective way to cover your windows efficiently and adequately in order to get proper light control while having other functional values. Proper customization and installation can bring elegance and luxurious appeal throughout your arena, mainly they are designed to change the entire feeling of a room. But the time comes when they need to be taken down for various reasons, it can be for a look change or for cleaning purposes. There are different types of blinds available in the market, and each one has a different mounting system. No matter what kind of window blind you have, removing them is an easy process that requires few tools and proper knowledge. If you are new to this process then you might be unaware of where to start from. But we can help you out, our step by step guidelines will help to remove the blinds from windows smoothly without any damage. Go through this article before you get started and avoid mistakes that might occur during the process.

Window Blinds Collection

Looking to replace or upgrade your blinds? Look no further and explore the variety of options at hand.

Disclaimer: This is the basic blind removal guideline that you can follow to take away your blinds without any hassle. ZebraBlinds takes no responsibility for any issues or damage caused during the DIY method. Depending on the blind type and mounting procedure, the steps may vary. It’s better to check the product manual before you get into the task or consult with the professional for a detailed guideline so that you can protect your product from all types of damages.

Step by Step Guidelines: Removing Blinds from Window

• Step 1: Keep the Blinds Open
The first thing you need to do is to keep your blinds open all the way in order to prevent the damage during removal. Pull the cord down and let the blind go up as high as it can go.

• Step 2: Remove Cover If Any
To locate the brackets that hold the blinds in position, you have to eliminate the cover (a wide plastic material) first which is located at the top of the blind. Be gentle and pull it away from the blinds, make sure you don’t press too much pressure as it can break the cover. Use your hand or screwdriver to remove them smoothly. If the cover is not there, then go to step number 3.

• Step 3: Check for Brackets
There are multiple window blinds available in recent market, and each of them follows a different mounting method. Have a closer look at the top of the blind and find out the location of brackets. You will find these brackets either the front of the blinds or above the blinds, attached with the wall (situated between the blinds and top of the window).

• Step 4: Loosen the Blinds
Once you get the brackets, it’s time to loosen the blinds. Take a screwdriver to open the clips or brackets that hold the blinds in the right place. Make sure to hold onto the blinds, otherwise, they will fall toward you.

• Step 5: Take Out the Blinds from the Window
After opening the brackets, use your hand to hold the top of the blinds. Take out the blinds outward toward the middle and gently bring them away from the window. If they are not coming out, double-check once, you have missed any additional clip or bracket and do the needful.

• Step 6: Final Touch
If you are removing the blinds for cleaning purposes, then wash them and attach them again on the windows using the brackets. And if you are planning to replace your existing blind with new one, then fix the new blind and decorate your windows however you wish.

Conclusion!!

Removal blinds from the window is not that difficult as it sounds. Following the right steps will make your job done easier without any error or complication. Reach out to the experts for more help!

Leave a Reply

Your email address will not be published. Required fields are marked *