All Articles

How To Fix Cordless Blinds That Won’t Go Up

How To Fix Cordless Blinds That Wont Go Up

A classy house always has blinds that make the living spaces look attractive and inviting. Cordless blinds are very popular because it makes life easy and untangled – literally. Cords on the blinds can also pose choking hazards when children or pets are also living in the house. As a result, cordless blinds make for an overall good choice for your window dressing needs.

Lifting and shutting cordless blinds are usually an easy and uncomplicated process. But at times, like everything in a typical home, cordless blinds too may need repair and maintenance. Sometimes, no matter how much you try, you will find that your cordless blinds will not go up or down. At such times, you may wonder to yourselves how to fix cordless blinds that won’t go up! But don’t worry. There is an easy, step by step process you can follow to make sure that your cordless blinds are back to spick and span condition. The great thing about this is that you will not need to hire a professional to repair your cordless blinds that won’t go up. Instead, all you need to do is put in some time and effort to get it all done at no cost at all.

Why Your Cordless Blinds Won’t Go Up

Before you go and find the answer to how to fix cordless blinds that won’t go up, you will need to understand why the cordless blinds won’t go up.

• The internal motor may have to be reset.
All the cordless blinds come with motor springs that are placed internally. These internal motor springs retract when the blinds are lifted. These then help in holding the blinds in the lifted place at one point, the lifting motion is stopped. This internal motor spring might need resetting over time for it to function properly.

• The internal ribbons may have to be untangled.
There are internal ribbons that are placed all along the insides of the blinds. These ribbons may rarely get tangled and may cause the blinds to malfunction.

• The blinds are placed in an up position for way too long.
If your cordless blind are kept too long in the up position, the internal motor may not work when you try to activate it again. In such cases, the internal motor may need to be reset to make sure that it works properly again.

• Defect during the manufacturing process
If you find that your blind won’t go up as soon as you fix it or shortly afterward, it might be because there might be because of some kind of manufacturing defect. This might be especially if your blinds are of lower quality.

• Effects of humidity and heat
If the place where you live is prone to extreme levels of heat and humidity, they can cause your blinds to expand. This can, in turn, cause the blinds to bend out of shape resulting in them not going up when you try to raise them.

Disclaimer: Please follow the instructions at your own risk. ZebraBlinds takes no liability for any issues or damage caused by following DIY methods. Since all blinds and shades are different, we always recommend checking with your blind manufacturer or retailer first before making any modifications to your blinds. As well, if you are uncomfortable on your own, look for the help of a professional.

Fixing Cordless Horizontal Blinds

If you find that you are unable to lift your horizontal blinds up, you may try the following steps.
• Use both your hands and place them on the sides of the blinds. Now, pull them all the way down.
• Use a zig-zag motion to rock the blind to lift it up slowly.
• Now, pull it all the way down again and then try lifting it up again.
• Repeat this process many times to help reset your blind’s mechanism.

Fixing Cordless Roller Blinds

Cordless rollers have a rolling mechanism that helps you to lower and lift the blinds in place of cords. When the roller blinds won’t go up or when they won’t go up evenly, you may use the following steps to solve the problem.

• Remove one end of the blind from the bracket and leave the other end in the bracket. This way, you will be able to spin the blinds.
• Now, spin the blinds many times with the spring inserted in the bracket. The spinning action will help re-tension the blinds.
• Now, slide it back into the bracket. The tension of the blinds would have now been restored. You will now be able to lift the blinds up easily.

Fixing Cellular Shades

Are you wondering how to fix cordless cellular shades that are stuck? Try the steps below to fix your problem.
• Use your hands and place them on either sides of your cordless blinds. Pull them all the way down as far as they would go.
• Now, lift the blind from the window. The angle of the lift should be a 45-degree angle.
• Use a to and fro motion to tug the blinds downwards a couple of times. The blinds should be at a 45-degree angle all this while. Make sure that you do not pull it too hard as this might cause accidental damage to the blinds.
• Now, raise it to the up position. This time, the blinds are supposed to stay in that position.
• Lower and raise the blinds a few times to make sure that the mechanism is working properly.

Fixing Cordless Roman Blinds

A cordless roman blind works in more or less similar ways to cellular blinds. The method of fixing it is also very similar to fixing cellular blinds. Follow the steps below.
• Pull the blinds down as far as they would go.
• Now, hold blinds at a 45-degree angle to the windows.
• Tug on the blind downwards a couple of times taking care not to break the blinds.
• Now, push the blinds up. Doing this is supposed to re-set the motor.
• If this does not work, you will need to use your hands to turn the tube of your cellular blinds halfway through. Doing this will ensure that the mechanism is reset and the blinds go into an up position.
• Make sure to try lifting the blinds up and down a couple of times to make sure that they are working well.

1 thought on “How To Fix Cordless Blinds That Won’t Go Up

  1. I have three cordless Bali cellular blinds on a triple window, but they share one header. Thus, I can’t take the header down to check the springs, clips, and motor. It feels as if one side (the left) has come loose entirely, because when following your directions I can get the right side to engage and go up (at least part way) but the left side stays limp.

    Even if I could take the whole triple header down, I don’t see any way to unfasten it from the window frame. Any suggestions? Thanks!

Leave a Reply

Your email address will not be published. Required fields are marked *