When it comes to home decor, we always want to make sure that all the key elements should fit our decor type while inspiring the aesthetic sense. No matter whether it is a small artwork or a big couch, we need to pay full attention to all of them. And the same rule is applicable to your windows too. There may be different sizes and shapes of windows available in your house and each of them requires special care and maintenance in order to achieve a comfy indoor atmosphere. And there are several window treatments available to do this job, from wooden blinds to roller shades to vertical blinds. Depending on our taste and preferences, we choose the one that will look aesthetically pleasing on the windows and at the same time will provide some practical and functional values. Most homeowners opt for faux wood Venetian blinds as they are cost-effective, highly durable and sturdy. These practical window solutions help to enhance the comfort and beauty of your residential and commercial spaces. These blinds have been around us for decades because of their incredible sturdiness, and functional smoothness. Adjusting the slats offer great control over natural light and privacy, and their sleek and smooth appeal will bring charming beauty to your place.
Though you can get these blinds ready-made, custom-made blinds offer a perfect fit and you can select the style and finish as per your choice. However, due to measuring mistakes or manufacturing errors, you may end up with a Venetian blind that is too wide for your windows. When faced with such a situation, you can follow some DIY process – to cut the blind to get the correct fit. You may find this task difficult but following the right guideline will help you out while saving money on professional fixing. All you require is some patience and the appropriate tools. Read on to get a basic idea of cutting them!
Step By Step Ways of Cutting Faux Wood Venetian Blinds
Before you cut these faux wood venetian blinds, it’s necessary to know why right sized blinds are helpful for windows.
- Wide Venetian blinds will not sit well on the windows. They will stick out which can impact the functionality of the blinds.
- Oversized blinds may look unattractive on the windows but cutting them to the appropriate dimension will impart an exquisite appeal.
- If the blinds are too long, they can get damaged with kids and pets crashing into them.
- Right sized venetian blinds assure smooth functions and create a comfy room ambiance and invite sophistication and ultimate elegance.
Now, follow the below instructions to cut them as per your window size and enjoy maximum benefits and luxury –
Disclaimer: Following the below steps will help to cut the faux wood venetian blinds and bring them to the desired fit without putting too much effort. But it’s highly recommended to have them cut professionally to avoid mistakes. ZebraBlinds will not be responsible for any damage caused to your product during the task!
Cut the Headrail:
- Have a measuring tape and determine the width of the inside window frame to get the measurement of the blind. Measure in three places – the top, bottom, and middle of the window. And take the smallest measurement.
- Subtract a few inches from both the sides to ensure your blind has enough space to move up and down.
- Measure the blinds from the head rail and use a pencil to mark the new desired length. Cut equal amounts on both sides.
- Start cutting the headrail at the marked point. Remove the metal and stiffener bracket, and then take a hacksaw for cutting. Cut off the rough edges using a metal file. Though these edges will be covered by the mounting brackets, so they won’t be visible.
- Place the metal end stiffener onto the newly cut headrail.
Cut the Blind Slats:
- Put the slats on a plain surface and line them up including the bottom rail.
- To keep them tight and together in a place, use a rubber band or a clamp. This will give you a perfect cut.
- To prevent splintering or chipping, cover the ends of the slats with tape.
- Now, measure and mark the width appropriately. For this, it should be in line with the newly cut headrail, and then draw a line.
- Cut the blind slats and bottom rail using a circular saw.
- In the last step, make sure that all the slats, the headrail, and bottom rail are cut at the same length. If not, then trim them again as required.